AirPods is different from everyday wired headsets and needs to be connected to the device before they can be used. Let’s take a look at some of AirPods’ tips.
Enable AirPods “Hey Sir” call function
On the iOS device, go to “Settings” – “Siri and Search” and confirm that the “Siri” wakeup function is enabled.
In the watchOS device, connect to AirPods through the Control Center.
On the macOS device, go to “System Preferences” – “Siri” and check “Listen to Siri on AirPods” to use. Even if you don’t support Siri’s Mac computer with the second generation AirPods, you can use this function to call Siri. .
You can use the Siri function to operate songs, adjust the volume, make a call, or navigate.
Currently AirPods’ Siri feature needs to work with iOS 12.2, watch 5.2, macOS Mojave 10.4.4 device connections.
AirPods’ endurance
When AirPods’ battery level is as low as 10%, AirPods will emit a low battery tone, and a tone will sound again before AirPods is about to shut down.
Second generation AirPods
One charge allows AirPods to provide up to 5 hours of listening time or 3 hours of talk time;
Use the charging box to charge multiple times, you can enjoy more than 24 hours of listening time or up to 18 hours of talking time;
If you charge AirPods in the charging case for 15 minutes, you can get up to 3 hours of listening time or up to 2 hours of talk time.
Generation AirPods
One charge allows AirPods to provide up to 5 hours of listening time or 2 hours of talk time;
Use the charging box to charge multiple times, you can enjoy more than 24 hours of listening time or up to 11 hours of talk time;
If you charge AirPods in the charging case for 15 minutes, you can get up to 3 hours of listening time or up to 1 hour of talk time.
AirPods and the charging box are fully charged for approximately 2 hours.
Extend AirPods continuous use time
You can wear a single AirPod alone, and the other can be put back into the charging river for charging. Alternate use can extend the use time. Opening the box repeatedly Turning off the charging box may reduce the battery level of the charging box. Reducing the number of opening and closing can make the charging box retain more power.
When AirPods is idle, please put it back in the charging case as much as possible to avoid loss and AirPods is fully charged.
AirPods switches connections between logins to the same iCloud device
AirPods can be connected directly between iCloud devices, but when the two devices are close together, the Bluetooth signals may interfere with each other. Try to turn off the Bluetooth of one of the devices and connect again.
iOS and watchOS devices can view and switch audio playback devices in control.
AirPods Official Cleaning Advice
Disrupting the outer casing with a soft cloth or microfiber cloth;
Dry cotton swab to clean the microphone and speaker grille;
a dry soft hair brush to remove debris from the mesh cover;
If necessary, wipe with a 70% isopropyl alcohol lightly damp cloth;
Do not use sharp objects or abrasive materials;
Avoid placing any objects at the charging port;
Avoid spilling any liquid into the opening;
Dry the charging box and open the box upside down.
AirPods restore factory settings
- Open “Settings” – “Bluetooth” on your iOS device to find the “AirPods” item.
- Tap the blue icon on the right side of AirPods and click “Ignore this device” (the above two steps are to clear the AirPods information in the device);
- Open the AirPods charging box cover and press the reset on the back until the white indicator light flashes alternately.
At this point, AirPods can be placed close to any device for new pairing.
